R&D
Equipment ( test )
Name Image Data Assessment item Assessment standard
I-Scan
(Surface pressure gauge)
Over 200 flexible, thin film sensors are available in different sizes, shapes, resolutions, temperature ratings, and pressure ranges (up to 25,000 psi or 1,700 bar).
· High spatial resolution:
- Up to 248 sensing elements/cm2
  (1,600 sensing elements/in2)
- Sensing elements with as narrow as 0.1 mm   (0.02 in.)spacing
· Sensing area ranging from 3 mm x 3 mm
  (.12 in. x .12 in.)to up to 1,734 mm x 1,768 mm   (68 in. x 69 in.)
· Optional high-temp sensors can withstand up to
  200°C (392°F)
·Total force
·Pressure  distribution
·Peak pressure
·Center of force
·Forces in  different areas
-
5 pressure
SYSTEM
· Cylinder & Screw Φ70,60,60,40,40 L/D 28,
· MOTOR 40,30,30,30,15,15HP*4P/ Inverter   control
· HEATER SSR CONTROL/ air-cooling system
· HOPER DRYER&LOADER
· Oven&Water bath&Band'g M/C&Slit M/C
·Pilot product
-
Multi-Axis Actual Durability Tester · Peak Dynamic Force : 8.0kN
· Continuous Dynamic Force : 3.0kN
· Maximum Acceleration : 15G
· Velocity(Continuous) : 2.5m/s
· Maximum Stroke : 250mm
· Frequency Range : ~200Hz
· Noise Level : 50dBA
·Durability
KS M 6604
Dynamic characteristic tester · Max range : ±30 mm(static), ±10 mm(dynamic)
· 2000 Kgf
· Max speed : 500 mm/sec / 300 Hz
·Dynamic,Static S/P Interger test
ES25335-00
ES25335-01
Aging tester · Temperature range : 0 ~ 250℃ ·Aging test EES25335-00
ES25335-01
MS269-03
ASTM D573
Ozone tester · Form : EG2001LR
· Range : 0 ~ 200pphm
·Ozone test MS269-03
ASTM D1171
Automatic gravity meter · SPECIMEN RANGE : 0.5~120g
· DENSITY RESOLUTION : 0.001~1
·gravity meter test ISO 1183
Tube typed(Aging)tester · TEMP.MAX 230℃
· VOLT 100V
· AMP. 25A
·Aging, heat resistant test ASTM D471
ISO 1817
Cold resistance blow tester · Temperature range : MAX -50℃
· Specification : in accordance with KSC 3004
· (freezing type : Dry ice)
·Cold resistance test ASTM D2137
MS269-03
Negative pressure tester · Usage temperature: 23 ~ 200 ℃
· Usage negative pressure:100Kpa (Negative pressure available: 21Kpa)
·Negative pressure test ES28138-03
GMW16074
Tension tester
(I-200-15)
· Load : 100kg/500kg(exchangeable)
· Speed : 0~1000mm/min
·tension test
·Tension test
ISO 37
MS269-03
ASTM D412
Abrasion tester NBS
(I-200-16)
· RPM : 45 RPM±5
· grinding wheel drum : diameter 150mm - circle
· power : AC 220 V 3A 50/60Hz 3
·abrasion test ASTM D1630
Single axis durability tester
(I-200-17)
· Maximum range : ±100 mm
· Maximum load : 10 KN / 1KN
· Maximum speed : 660 mm/sec
· Maximum frequency : 50 Hz
·durability test
·Static Characteristic test
ES25335-00
ES25335-01
Bush(3 axes) durability tester
(I-200-18)
· Common
· Maximum range : ± 50 mm
· Maximum speed : 280 mm/sec / 20 Hz
· x axis ? Max load : ± 1000 Kgf
· y axis ? Max load : ± 2000 Kgf
· z axis
- Max torque : ± 2000 Kgf
- Max angle : ± 45 deg
- Max speed : 10 rad/sec (10Hz)
·(3 axes) durability test ES25335-00
ES25335-01
Cold resistance cycle tester
(I-200-19)
· Power : AC 220V 50/60Hz 3-Phase
· electric capacity : 7KW
· usage range of temperature : -40℃ ~ 120℃
· HUMIDITY : 30~99%
·Complex Environment Test MS269-03
Axial & Rotational Direction Durability Tester
(I-200-20)
· Max range : ± 25mm
· Electric capacity : 17.5KW
· Usage temperature : 0 ~ 100℃
· Test speed : axis -1705RPM/ rotation -1Kgf/m
·Durability Test Refer to drawings
Water leak durability tester
(I-200-21)
· UP 550 program controller
· for both water leak and durability check
·water leak test
·durability test
Refer to drawings
Durability tester for hose only
(I-200-22)
· Usage temperature : -50 ~ 200 ℃
· Max range : 80mm (± 40mm)
· Max speed : 10Hz
  (±15mm ⇒ 10 Hz / ±40mm ⇒ 5 Hz)
· Internal storage : 1000(W)X900(D)X700(H)mm
· airtight negative pressure : 10Kpa (Leak Test only)
·Durability test for hose only ES28138-03
GMW15143
UTM tester
(I-200-23)
· Load : 2000KG
· Speed : 0~500mm/min
· Chamber : -40 ~ 150℃
·Static characteristics(Tension,compression)
 test
ES28100-01
IRHD
(I-200-24)
· Hardness measurement : 30Hs ~ 90Hs ·Hardness measurement test ASTM D1415
Hanger durability tester
(I-200-27)
· Load : 500KG
· Usage temperature : ambient temperature ~150℃
· Speed : 360CPM (6Hz)
·Hanger durability
 test
Refer to drawings
TGA analyzer(I-200-30) · Voltage:220V
· Available temperature : 20℃ ~ 900℃
· Component analysis test ASTM D7582
FT-IR
Spectroscope
(I-200-32)
· Voltage : 220V
· Operating system : Windows XP
·Spectroscope test ISO4650
UTM tester (10 ton)
(I-200-34)
· WEIGHT : 10000 Kgf ·static characteristics(Tensile,Compression)
 test
Refer to drawings
Cold resistance tester
(I-200-41)
· MAX -40℃ ·Cold resistance test ES25335-00
ES25335-01
Vibration Durability Tester
(I-200-47)
· Vibration range : 5 ~ 3000 Hz
· Max load : 600 Kgf
· Max speed : 140 Cm/Sec
· Max acceleration : 100 G (980 ㎨)
· Chamber temperature range : -50 ~ 200 ℃
· Chamber moisture range : 20~98%RH
· Usage test : Sine / Random / Shock / resonance extract
·Vibration Durability Test ES25335-00
ES25335-01
2-Axis Durability Tester
(I-200-48)
· Load : MAX 2500Kgf
· Toque : 50Kgf.m / 5Kgf.m
· Range : ±50mm
· Angle : ±50deg / temperature : -50~150
·2-Axis Durability Test Refer to drawings
Mechanical module
Tester
(I-200-49)
· Load : FRT 30000Kgf / RR 25000Kgf
· FRT ±100mm / RR ±100mm
· Speed : FRT 3Hz / RR 3Hz
·S/PAD ASS'Y
 Durability Test
Refer to drawings
Heavy metal tester
(I-200-51)
· Analysis time : 50~200 Sec
· Resolution : 149eV
· Detection limit : 2ppm
·Heavy metal, Component analysis
 test
·Plating thickness measurement
 test
Refer to drawings
Combustion tester
(I-200-52)
· Flame contact distance: 19mm
· Power : AC 220V
·Combustion test FMVSS 302
Bellows & Hose durability tester · Usage temperature : -50 ~ 200 ℃
· Usage negative pressure : 0~100Kpa -.Speed:15Kpa/Sec
· Airtight negative pressure :1.28~100Kpa
· Max range : 200mm (± 100mm) -.Max angle :±40˚
· Max speed : 5Hz (300CPM)
· Chamber size : 1100(W)X1100(D)X900(H)mm
· Tester size : 2200(W)X1800(D)X1700(H)mm
·Bellows & Hose durability test Refer to drawings
VOCs measurement · Measurement range : 0.01 ~ 9999ppm
· Resolution : 0.01ppm
· Measurement mode : Single measurement mode
· Power : AC100V, AC220V
· Repeatability : 0.015ppm
·TVOC measurement test MS300-55
Formaldehyde measurement · Measurement range : 0.01 ~ 30ppm
· Resolution : 0.01ppm
· Measurement mode : single measurement mode
· Power : AC100V, AC220V
· Repeatability : 0.015ppm
·HCHO measurement test MS300-55
MTS dynamic tester · Load : MAX 2500Kgf
· Speed : MAX 700Hz
· Range : ±20mm
· Crosshead : 400mm
· Temperature : -40~150 ℃
·Dynamic characteristics test CLD (Compression Load Deflection) test ES25335-00
ES25335-01
GMW15618
Automatic particle counter(APC) · Particle measurement : 0.75(8.13 ㎛/pixel) ~ 13.5(0.428
  ㎛/pixel)
· Brightness control : manual : 0% ~ 99.3% , automatic : 55%(Fix)
·Hose Cleanliness Measurement E56300-E-04
ISO 16232
FOD seal durability tester · MAIN STRUCTURE : 1100W x 1500D x 2300H
· TORQUE CELL : 2N-m
· SERVO MOTOR : 1000RPM
· CHAMBER
- Composition : Separable 2 zone typed individual cycle control
- TEMP : -40 ~ 150 ℃
·FOD SEAL Durability & Torque Measurement test Refer to drawings
Dasan Tower 2F, 644, DaewangPangyo ro , Bundang Gu, Seongnam, Gyeonggi-do,463-400 KOREA ,
TEL : +82-70-4946-7200 FAX : +82-31-8017-8535
Yeongchen Factory : 23 UnhaGongDan 1-gil, Yeongcheon-si GyeongsangBuk-do,38828 KOREA ,
TEL : +82-70-4946-7300 FAX : +82-54-336-2313
Yeongchen Logistics Center : 17 UnhaGongDan 1-gil, Yeongcheon-si GyeongsangBuk-do,38828 KOREA ,
TEL : +82-70-4946-7247 FAX : +82-54-336-2316
Copyrightⓒ DMC 2018. All Rights Reserved.